The second largest cost of energy next to heat/air conditioning systems in the home is heating of water and whether your home uses electricity, gas, or liquid propane gas, water heaters are designed to help you meet the hot water demands of your household. Although water heaters are available powered by gas, oil or electric-fired devices that heat water for residential or commercial use, but gas heaters tend to be more popular for larger flow rates.

The function of the water heater is to raise the temperature of water and They come in a variety of sizes for different applications, such as a whole-house water heater, a hot water source for a remote bathroom or hot tub, or as a boiler to provide hot water for a home heating system. Energy is transferred into the body of water in the heater just as if someone put a flame beneath a pan of water on a stove.

Gas released from the bowels of the earth with crude oil contains a lot of energy, some of which is harnessed to run a water heater. The energy stored up in propane and electricity can also heat water under certain conditions. The scarcity of propane and the cost of electrical energy generation neutralize their cost effectiveness in powering water heaters compared to natural gas.

Gas is burned and releases heat that passes through the burner under the tank of the water heater and eventually warms the water. The wall holds a valve that opens and shuts to control the flow of gas into the water heater. Devising a means by which the temperature in a heater is controlled by the aid of a thermostat was a good idea of the manufacturers.

The whole of the heating depends on a pilot light that brings the system alive. A good example of this process can be found by closely watching a gas grill. The combusted gas fumes find their way out of the heater through a venting system. The roof of the heater is fitted with a PVC pipe that completes the venting system.

It should come as no big surprise to learn of the innovation that allows for fan-assisted toxin emission systems on gas water heaters. The supply of cold water is made possible by a pipe linked to the heater. Pipes in the system channel heated water to its final point of use through faucets or valves.

Some tanks actually do not have a water storage system. Due to the absence of a tank, the water has to be run through several burners continuously until it is needed for its final application. Gas water heaters that do not have tanks work in a slightly different way from those with tanks.

Being unable to store water, they simply cycle it repeatedly, and supply it at any time needed. More than the regular gas water heater, a tankless version is able to deliver more hot water for less fuel pumped into it. The design of this prototype depends on the opening of the faucet to begin heating. If you are looking for a heater that can hold water, do not get a tankless version. The function of the tankless heater is just to heat water and channel it to the final point of use via the faucet.

Article Source: http://www.energyefficienthomearticles.com

Get more facts about water heaters by visiting www.water-heaters-explained.info a popular website that provides tips and advice to solve you hot water problems
Click here for other unique water heaters articles.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

# of Ratings = 1 | Rating = 1/5